contact

menu

ABOUT DRYERS

ABOUT DRYERS

INTRODUCTION TO DRYERS

~THE CD DRYER ~

img

THE UNIQUE NISHIMURA CD DRYER UTILIZES DISKS AS ITS DRYING MEDIA
First and foremost, our customers choose Nishimura Works’ CD Dryers for their ability to get the job done. Using our unique technology, Nishimura Works has designed an energy-efficient, low-cost, process-reducing, space-saving, high-performance liquid dryer.

Compared to similar type dryers, such as drum dryers, the CD Dryer delivers an average TWICE the drying capacity per square meter of drying surface while using much lower steam pressure. It dries liquids using both sides of its thin disks, providing the same drying surface area in as little as 40% of the floor space of a drum dryer, allowing better utilization of available space and eliminating additional building requirements.
The CD dryer dries liquids instantly to a powder, eliminating extra process steps such as concentrating and pulverizing, greatly improving work efficiency. The simple design of the CD Dryer makes clean-up and maintenance easy, saving you time and money.
If your company is looking for equipment to produce powders, recycle liquid materials, or to simply treat liquid waste, the CD Dryer is the answer to your needs.

Nishimura Works will recommend the appropriate CD Dryer after thoroughly evaluating your needs through customer interviews, on-site reviews and test drying of your sample liquid. We will also provide technical data from previous tests of similar liquids and resulting dried materials.

The unique Nishimura CD Dryer has been recognized by both domestic and overseas customers as a superior drying machine. Nishimura Works is proud to have delivered our CD dryers to customers in 11 countries. We hold 7 Japanese patents, 6 overseas trademarks, and 3 Japanese trademarks.

CD Dryer

COMPARISON OF DRYERS

Machine Type CD Dryer Drum Dryer Spray Dryer
Drying Method Thermal Conduction Thermal Conduction Nebulization
Operational
Overview
Liquid poured onto flat face of steam-heated disk. Water evaporates during one rotation of disk. Dried material is scraped from disk with knife-like scraper and collected. Excess liquid is re-poured over disk by pump. Liquid applied to circumferential surface of steam-heated drum. Water evaporates during one rotation of drum. Dried material is scraped from drum with knife-like scraper and collected. Single and double drum types available. Methods of liquid application vary. Liquid is sprayed into heated atmosphere, instantly drying. Dried material is collected by cyclone, bag filter, etc.
Condition of
Dried Material
Dry or Concentrated Dry or Concentrated Dry
Operational
Method
Continuous Continuous Continuous
Heat Source Saturated Steam Saturated Steam Electricity, Steam, Gaseous or Liquid Fuel, Effluent Gas, Exhaust Heat
Pressure of Steam Used 0.1-0.4MPa 0.4-0.8MPa ---
Casing Material SUS or FRP SUS SUS
Heat Transfer Surface Material (Surface Treatment) Thermal Spray Coating (Main Component: Tungsten Carbide WC) Hard Chrome Plating (Main Component: Chrome) ---
Liquid Treatment Capacity 50-100kg/㎡ h 25-60kg/㎡ h ---
Steam Usage (Compared to Amount of Liquid Treated) 1.0 to 1.3x
Amount of liquid treated
1.5 to 1.6 x
Amount of liquid treated
---
Drying Time 3 to 60 s 12 to 60 s Instantaneous
Floor Space 1 2.5 x CD Dryer 12 x CD Dryer(Dryer only, exclusive of Auxiliary Equipment )
Size
Initial Costs
Running Costs
Maintenance Costs Unknown
Simplicity of System
Ease of Cleaning
Maintenance
Prevention of Contamination ▲ to ○
Dispersion of Dried Materials
Time Needed for Start-up 5 min 45 min ---
Time Needed
for Shut-down
10 min 45 min ---
Consumables Scraper Scraper Nozzle, Rotary Disk
Scraper Adjustment Simple, even on large machines Difficult on large machines ---

※Comparison of machines with similar capacities. ◎= Very Good ○=Good ▲=Satisfactory

CD Dryers VS. Drum Dryers
Dryer Type CD Dryer Single Drum Dryer Double Drum Dryer
Process Overview Liquid is poured over disk by pump. Liquid which does not adhere to the disk is reapplied. Liquid levels in the circulation tank are controlled automatically by the level sensor. Liquid application occurs when the drum rotates through the dip tank. The level sensor automatically controls the amount of liquid in the circulation tank. Liquid is top fed between the two drums. Feed amount is controlled by the metering pump.
Notes A D-Type dryer’s body is built with less than its full set of drying disks in anticipation of a future increase in drying needs. For example, an SCD-1312D10 Dryer has 10 disks in a 12-disk casing. When drying requirements change, addition of the other 2 disks is an easy way to increase production. With dip feed type dryers, problems caused by sedimentation can occur in the dip tank when liquid becomes concentrated. With top feed type dryers, leaking can occur because adjustment of the space between drums is difficult. Also, hard materials in the liquid may cause damage at the meeting point of the 2 drums.
Feeding for top fed dryers is often done by a metering pump. Changes in viscosity and/or concentration can cause leaking or under-feeding.

CD Dryer

  • Home
  • Introduction
  • About Dryers
  • Dried Product Sample Information
  • Applications
  • On the Production Line
  • Recycling Waste Liquid
  • Reducing Your Disposal Costs
  • Products
  • CD (Compact Disk) Dryer
  • CD Dryer Video Gallery
  • Case Studies
  • Case Studies Drying for Disposal
  • Case Studies Recycling
  • 
Delivery Record
  • Trade Shows
  • Why Choose NISHIMURA WORKS Co., Ltd.
  • Purchasing and Support
  • Corporate Information
  • FAQs

Test Request Form

NISHIMURA WORKS co., ltd.

Copyright 2015 All rights reserved NISHIMURA WORKS co., ltd.

  • telephone
  • mail
  • Test Request Form

CD Dryer NISHIMURA WORKS CO., LTD.

Copyright 2015 All rights reserved NISHIMURA WORKS co., ltd.